Our Poplar EV-Faced Plywood a.k.a Poplar Engineered Veneer faced Plywood is a hybrid plywood (so-called Structural Decorative Plywood or Architectural Plywood) which is made with 100% rubberwood core with Poplar Engineered Veneer (reconstituted poplar veneer) applied to both the front and back surfaces. It carries good mechanical and physical properties of Structural Plywood, and aesthetic features of Decorative Plywood. The layers are bonded using E0-grade Urea-melamine-formaldehyde (UMF) adhesive, offering strong durability with 100% WBP (Water Boil Proof) performance.
The product is available in thicknesses ranging from 5mm to 30mm.
General information:
Plywood type: Architectural Plywood
Dimensions:
Length x Width: 2440mm x 1220mm ± 2mm, or cut-to-size
Thickness: 5-30mm ± 0.5mm
Structure: LVL/LVD/LVB
Materials:
| Layer | Type | Grade | Certified |
| Upper face | Poplar Engineered veneer | A | |
| Inner | Virgin rubberwood | A | FSC-CoC certification issued to ANN PLYWOOD manufacturer FSC 100% certification issued to ANN PLYWOOD manufacturer |
| Lower face | Poplar Engineered veneer | A | |
| Adhesive/Resin | Urea-melamine-formaldehyde (MUF) | E0 | EPA TSCA Title VI certification issued to ANN PLYWOOD manufacturer CARB P2 certification issued to ANN PLYWOOD manufacturer |
Physical properties:
| Properties | Target Performance Value | Standard | Test Result | Technical Report |
| Moisture content | ≤ 12% | - | 5-12% | - |
| Swelling in thickness after immersion in water for 24h | ≤ 12% | BS EN 317:1993 | 2.1% | Test Report_Mechanical & Physical properties_ANN PLYWOOD |
| Density | 650 - 710 kg/m3 | BS EN 323:1993 | 704 kg/m3 | |
| Formaldehyde Emission | ≤ 0.05 ppm | ASTM D6007-22 | 0.02 ppm | Test Report_Formaldehyde Emission_ANN PLYWOOD |
| Surface Roughness | < 12 µm | ISO 21920-3:2021 | R̄ = 7.491 µm | Test Report_Surface Roughness_ANN PLYWOOD |
Mechanical properties:
| Properties | Target Performance Value | Standard | Test Result | Technical Report |
| Bending strength | ≥ 45 N/mm2 | BS EN 310:1993 | 51.1 N/mm2 | Test Report_Mechanical & Physical properties_ANN PLYWOOD |
| Modulus of elasticity in bending | ≥ 5000 N/mm2 | BS EN 310:1993 | 5954 N/mm2 | |
| Tensile strength perpendicular to the plane of the board (internal bonding) | ≥ 0.50 N/mm2 | BS EN 319:1993 | 1.74 N/mm2 | |
| Screw Holding Strength (Face) | ≥ 1100 N | BS EN 320:1993 | 2200 N | |
| Screw Holding Strength (Edge) | ≥ 900 N | BS EN 320:1993 | 2030 N |
Our Non-faced Rubbercore Plywood is Structural Plywood which is made from 100% rubberwood with both the top and bottom surfaces sanded smooth. The layers are bonded using E0-grade Urea-melamine-formaldehyde (UMF) adhesive, delivering strong durability and full compliance with 100% WBP (Water Boil Proof) standards.
The product is available in thicknesses ranging from 5mm to 30mm.
Our Poplar EV-Faced Plywood a.k.a Poplar Engineered Veneer faced Plywood is a hybrid plywood (so-called Structural Decorative Plywood or Architectural Plywood) which is made with 100% rubberwood core with Poplar Engineered Veneer (reconstituted poplar veneer) applied to both the front and back surfaces. It carries good mechanical and physical properties of Structural Plywood, and aesthetic features of Decorative Plywood. The layers are bonded using E0-grade Urea-melamine-formaldehyde (UMF) adhesive, offering strong durability with 100% WBP (Water Boil Proof) performance.
The product is available in thicknesses ranging from 5mm to 30mm.
Natural poplar-faced Plywood has a light white color. It is a hybrid plywood (so-called Structural Decorative Plywood or Architectural Plywood) which is made with a 100% rubberwood core and overlaid on both sides with Aucoumea klaineana veneer. It carries good mechanical and physical properties of Structural Plywood, and aesthetic features of Decorative Plywood. All layers are bonded using E0-grade Urea-melamine-formaldehyde (MUF) adhesive, ensuring strong water-resistant performance that meets 100% WBP (Water Boil Proof) standards.
The product is available in thicknesses ranging from 5mm to 30mm.
Birch-faced Plywood has veneer faces that are pale, creamy white to light yellow or pale brown color, sometimes with a pinkish hue or a satiny sheen. It is a hybrid plywood (so-called Structural Decorative Plywood or Architectural Plywood) which is made with a 100% rubberwood core and overlaid on both sides with Birch veneer. It carries good mechanical and physical properties of Structural Plywood, and aesthetic features of Decorative Plywood. All layers are bonded using E0-grade Urea-melamine-formaldehyde (MUF) adhesive, ensuring strong water-resistant performance that meets 100% WBP (Water Boil Proof) standards.
The product is available in thicknesses ranging from 5mm to 30mm.
